What settings should I change on PS5 before GTA 6?

Run Settings > Screen and Video > Video Output and confirm Resolution is set to Automatic, HDR to On When Supported, and 120 Hz Output and VRR to Automatic if your TV supports them. Then run the HDR calibration under Adjust HDR. These are console-level settings that apply to every game.

What settings should I change on Xbox Series X|S?

Go to Settings > General > TV & display options. Set resolution to 4K UHD if your TV supports it, enable Allow 4K, Allow HDR10 and Auto HDR, then open Video modes and enable ALLM, VRR and 120 Hz if available. Run the Calibrate HDR for games tool while you are there.

Will GTA 6 have a performance mode?

Rockstar has not announced graphics modes, frame-rate targets or resolutions for GTA 6. Any page listing them is guessing. The console settings on this page are worth setting correctly regardless, because they apply system-wide.

Do I need to redo these settings when the game launches?

No. Everything here is a console-level display setting, stored per console and per TV input. Set it once and it applies to whatever you play, including on launch day.

Should I turn on Auto HDR on Xbox for GTA 6?

Auto HDR only applies to games that do not output HDR natively; the console skips it for games that do. Leaving it on is harmless and helps older titles, so there is no reason to change it ahead of a launch.

SoloPrompt AI

GTA 6 PS5 & Xbox Display Setup Guide

Every setting below is a console-level display option that applies to every game. Set them once and your display is already dialled in for November 19, 2026 — no guesswork about unannounced graphics modes required.

Hardware fact Menu paths follow the current console system software. Some options are hidden when your TV does not report support for them.

1.Check the cable and port
Physical setup
Use the HDMI cable that came in the PS5 box — it is an Ultra High Speed cable rated for the console's full output. Plug it into the TV input that supports the highest bandwidth; on many TVs only one or two ports are HDMI 2.1.
Why: A cable or port that cannot carry the bandwidth silently drops you to a lower mode instead of showing an error.
2.Set video output resolution
Settings › Screen and Video › Video Output › Resolution
Leave this on Automatic unless you have a specific reason not to. The console negotiates the highest resolution your TV reports.
Why: Manual overrides are the most common cause of a console being stuck at 1080p on a 4K TV.
3.Turn on HDR and calibrate it
Settings › Screen and Video › Video Output › HDR → On When Supported, then Adjust HDR
Run the three calibration screens. On the first two, press down until the symbol just disappears; on the third, until the symbol is only barely visible.
Why: Uncalibrated HDR is the reason many people think HDR looks washed out. This takes under a minute and applies to every game.
4.Enable 120 Hz output and VRR
Settings › Screen and Video › Video Output › 120 Hz Output and VRR → Automatic
If your TV does not support these, the options are greyed out — that is informative in itself. VRR has a separate 'Apply to Unsupported Games' toggle you can leave off.
Why: Both are console-level capabilities. Whether GTA 6 makes use of them has not been announced.
5.Turn on the TV's Game Mode
TV picture settings (not the console)
Switch the picture preset for that HDMI input to Game Mode or Game Optimizer. If your TV supports ALLM, the PS5 can trigger this automatically.
Why: The single largest controllable source of input lag, and it costs nothing.

What’s actually confirmed about GTA 6 — and what isn’t

Most “GTA 6 settings” pages online invent specifications. Here is the honest split, so you can tell which parts of this page are game facts and which are display advice that would be true for any modern console game.

Confirmed by Rockstar

Grand Theft Auto VI releases on November 19, 2026.
It launches on PlayStation 5 and Xbox Series X|S.
No PC version has been announced, and no release window for one has been given.

Not announced — we don’t claim it

Graphics modes (there is no announced fidelity or performance mode)
Frame-rate targets on any console
Output or render resolutions
HDR format or HDR grading
Ray tracing support
VRR or 120 Hz support
Install size and storage requirements
PC system requirements

Everything else on this page is either a documented capability of your console, cable or TV, or a clearly marked recommendation from us. Nothing here depends on knowing how GTA 6 will be configured.

Why do this ahead of launch day at all?

Not because GTA 6 needs it. Because launch day is the worst possible time to discover that your console has been outputting 1080p SDR into a 4K HDR panel for two years, or that your TV has been adding 80 ms of processing lag on top of every input. These settings are system-wide: fixing them improves everything you already play, and it means the first hours with a new game are spent playing rather than in menus.

The order that matters

Work outwards from the console. Cable and port first, because a bandwidth-limited chain makes every later setting unavailable. Then resolution, then HDR and its calibration, then the low-latency and high-refresh toggles. Finish on the TV itself with Game Mode — or let ALLM handle it, which is more reliable than remembering to switch presets.

What we are not going to tell you

There is no confirmed information about GTA 6’s graphics modes, frame-rate targets, output resolutions, HDR grading, ray tracing, install size or PC requirements. Rockstar has published the release date and the platforms, and that is it. A guide that claims otherwise is inventing specifications, and any settings advice built on invented specifications is worthless. Everything here is true today, on hardware you already own.

Next steps

Once the console side is set, check the rest of the chain. The GTA 6 Display Optimizer identifies the weakest link in your setup, Is my TV ready for GTA 6? gives a six-question readiness verdict, and the TV size & viewing distance calculator tells you whether your screen suits the room you actually sit in.

Frequently asked questions

What settings should I change on PS5 before GTA 6?: Run Settings > Screen and Video > Video Output and confirm Resolution is set to Automatic, HDR to On When Supported, and 120 Hz Output and VRR to Automatic if your TV supports them. Then run the HDR calibration under Adjust HDR. These are console-level settings that apply to every game.
What settings should I change on Xbox Series X|S?: Go to Settings > General > TV & display options. Set resolution to 4K UHD if your TV supports it, enable Allow 4K, Allow HDR10 and Auto HDR, then open Video modes and enable ALLM, VRR and 120 Hz if available. Run the Calibrate HDR for games tool while you are there.
Will GTA 6 have a performance mode?: Rockstar has not announced graphics modes, frame-rate targets or resolutions for GTA 6. Any page listing them is guessing. The console settings on this page are worth setting correctly regardless, because they apply system-wide.
Do I need to redo these settings when the game launches?: No. Everything here is a console-level display setting, stored per console and per TV input. Set it once and it applies to whatever you play, including on launch day.
Should I turn on Auto HDR on Xbox for GTA 6?: Auto HDR only applies to games that do not output HDR natively; the console skips it for games that do. Leaving it on is harmless and helps older titles, so there is no reason to change it ahead of a launch.

Sources

More GTA 6 display tools

SoloPromptAI is a free tool site for solo business owners — see all free tools, including the screen resolution checker and dead pixel test.